dynoKRAFT MPS-Series

Air-cooled engine dynamometer

Stationary engine test system with wide Torque and RPM coverage.

Features highlight

  • up to 3820 Nm
  • up to 9.500 RPM
  • flexible clutch

The dynoKRAFT MPS-Series stationary engine dynamometers offer exceptional high measurement precision together with best-in-class DAQ system and high speed Sport Devices PWS-HS Eddy-Current brake power supply.

This affordable dynamometer system can be used to test internal combustion or electric engines. It comes on non-adjustable chassis with stiff test bed allowing vibration-free high RPM testing.

Despite it’s moderate price the dynoKRAFT MPS-Series engine test systems offers full test automation and advanced software for data analysis.

For most applications the dynamometer is supplied with high-flexible TOK torsional clutch. Advanced semi-automatic engine docking systems are also available on request.
Please see the technical papers in “Downloads” section.

If you require even higher RPM test ranges please contact dynoKRAFT directly.
We also offer custom-build dynamometers with RPM-range up to 10.000 1/min.

There are four base versions available:
MPS80 – 800Nm – 9.500RPM
MPS170 – 1700Nm – 8.000RPM
MPS200 – 2000Nm – 6.800RPM
MPS380 – 3820Nm – 6.800RPM

Accuracy and Precision

  • data acquisition error: < 0,5%
  • timing accuracy: 10ns
  • DAQ input sampling rate: 50Hz

Test parameters

  • max rotational speed: up to 8.000RPM *
  • max torque: up to 3820Nm **

(*) model dependent
(**) Please contact us for detailed brake torque curves. Recommended long term brake load is 60% for test taking more than 15 minutes.

Data acquisition

  • Built-in eddy current brake temperature sensor
  • hall effect sensor: drum RPM pickup
  • power correction factor per: SAE, DIN, ISO, JIS, EG or none
  • available test modes:
    – inertia,
    – constant engine RPM,
    – sweep test (controlled acceleration),
    – fully automatic Sequenced/Programmed Test,
    – engine RPM steps,
    – road loads simulator
  • Closed-loop eddy current brake PID Controller with torque monitoring
  • speed dependent fan control
  • multiple input/output channels
  • Software relay control (allows remote activation of fans etc.)
  • free Software
  • free life-time Firmware updates
  • engine RPM pickup – inductive and capacitive
  • High Speed Ethernet connection
  • Remote control of dynamometer and vehicle systems from PC software (throttle actuator, clutch actuator, gear shift, blowers etc.)
  • built in CAN-BUS port
  • automatic environmental data acquisition
  • factory calibrated for highest precision

Mechanical features

  • low inertia for short response times to load / RPM change
  • high torque retarder with integrated temperature sensor
  • minimum maintenance
  • pneumatic fail-safe emergency brake

Electric features

  • high-torque retarder
  • precision load cell

Dimensions - Chassis

  • length: 1302mm
  • width: 812mm
  • height: 1036mm
  • axis center height: 700mm (747mm *)
  • weight: 388-708kg **

(*) without T-slot table the dynamometer is delivered on vibration dampers
(**) depending on model

Dimensions - T-slot table

  • length: 2500mm
  • width: 800mm
  • height: 300mm
  • T-slot size: 18mm (M16 thread)
  • T-slot spacing: 150x300mm
  • weight: 1015kg

Workshop requirements

  • Electric power: 380/400V 50Hz 20A 3-phase*
  • Compressed air: 6-8 bar
  • Computer: PC with Windows XP, Vista, 7, 8, 10 operating system

*Other electrical systems available on request at no extra charge.

Input specifications

  • Engine RPM input (capacitive and inductive clamp included)
  • 8x Analog input (0-5V)
  • 8x Thermocouple 0-1000 deg. Celcius (Type-K)
  • 1x Pulse Counter Input (Ex. detonation counter)
  • 1x CANBUS
  • 1x OBDII diagnostic interface (optional accessory)

Additional inputs available with CANBUS expansion modules.
(see Accessories tab)

Weather station

  • Pressure: 300 to 1100 @ +/-1 [mbar]
  • Humidity: +/-3,5% [RH]
  • Temperature-40 to +85 @ +/-1 [°C]

Output specifications

  • 8x Digital Outputs (12V relays)
  • 1x Air Speed Output (PWM or Analog 0-5V)
  • 1x Servo output (PWM, Analog 0-5V or RC-pulse)

Scope of delivery

  • dynoKRAFT MPS-Series dynamometer
  • T-slot table
  • PC-trolley
  • weather station with cable
  • SP6 Controller with cable
  • capacitive and inductive engine RPM pickup
  • calibration tool and weight
  • free SportDyno software
  • free easyMAP software
  • installation manual (.pdf file)
  • software manual (.pdf file)
  • 5 years warranty
  • free product support

Downloads

[product_categories orderby=”” order=”ASC” columns=”4″ ids=”40, 43, 49″]