The dynoKRAFT A200-2WD automotive chassis dynamometer combines affordable price and precise workmanship with best-in-class DAQ system and Software for comprehensive data analysis.

Roller width of 2170mm allow to test even wide-body race cars without problems

With 2000Nm eddy current brake the A200-2WD automotive chassis dynamometer allows to test up to 1000HP  (at wheel).
The drum diameter of 516mm reduces tire wear drastically and help keeping the tire temperature under control during long test sessions.

The dynoKRAFT A200-2WD can be freely configured with extension modules (additional inputs, OBD Interface etc…) to match customer needs and expanded in future to 4WD version thanks to our upgradable design concept.

Leasing from:
390 €

(less taxes and shipping/delivery)

Accuracy and Precision

  • data acquisition error: < 0,5%
  • timing accuracy: 10ns
  • DAQ input sampling rate: 50Hz

Test parameters

  • max speed: 300km/h (186 MPH)
  • max wheel torque: 2000Nm
  • max wheel power: approx. 1000HP

Data Aquisition

  • Built-in eddy current brake temperature sensor
  • hall effect sensor: drum RPM pickup
  • power correction factor per: SAE, DIN, ISO, JIS or none
  • available test modes:
    RPM Constant (engine RPM),
    Ramp Test (programmable slope),
    Sequenced/Programmed Test,
    Step Test,
    Road Simulation
  • Closed-loop eddy current brake PID Controller with torque monitoring
  • speed dependent fan control
  • multiple input/output channels
  • Software relay control (allows remote activation of fans etc.)
  • free Software
  • free life-time Firmware updates
  • engine RPM pickup – inductive and capacitive
  • High Speed Ethernet connection
  • Remote control of dynamometer and vehicle systems from PC software (throttle actuator, clutch actuator, gear shift, blowers etc.)
  • built in CAN-BUS port
  • automatic environmental data acquisition
  • factory calibrated for highest precision

Mechanical features

  • large, low inertia roller – high load change dynamics
  • knurled roller surface for maximum grip
  • compact design
  • anti-slip working surface
  • fail-safe emergency brake / roller lock – for easy vehicle straping
  • minimum maintenance
  • expandable to 4WD at any time

Electric features

  • high-torque retarder
  • precision load cell


  • length: 790mm *
  • width: 3220mm
  • height: 618mm
  • roller diameter: 516mm
  • roller width: 875mm
  • track min: 450mm **
  • track max: 2170mm **
  • max. allowed axis load: 3000kg

(*) without loading ramp
(**) smallest / largest width either on the inside or outside of the tires

Workshop requirements

  • Electric power: 380/400V 50Hz 20A 3-phase*
  • Compressed air: 8 bar
  • Computer: PC with Windows XP, Vista, 7, 8, 10 operating system

*Other electrical systems available on request at no extra charge.

Input specifications

  • 2 x Engine Rpm Speed input (Capacitive and Inductive clamps)
  • 6 x Analog inputs (0-5V)
  • 8 x Thermocouple 0-1000 deg. Celcius (Type-K, 1 input is in use by default)
  • 1 x Pulse Counter Input (Ex. detonation counter)

Additional inputs available with Modbus / Canbus expansion cards (requires one-time paid license)

Output specifications

  • 8 x Digital Outputs (12V Relays)
  • 1 x Air Speed Output (PWM 0-5V)
  • 1 x Servo output / Throttle (PWM 0-5V or RC pulse)


  • 1 x RS232 DB9 Connector
  • 1 x CANBUS (provision, future Firmware version)
  • 1 x Internal Bluetooth (available on request)

Weather Station

  • Pressure: 300 to 1100 @ +/-1 [mbar]
  • Humidity: +/-3,5% [RH]
  • Temperature: -40 to +85 @ +/-1 [°C]

Optional equipment

  • dynoKRAFT twinLAMBDA – dual wide-band lambda probe with gas flow stabilization block
  • analog / digital input expansion modules (up to 4 modules supported)
  • OBD II interface
  • xDS (Honda, Suzuki, Kawasaki) interface
  • dynoKRAFT autoRIDE – Computer controlled motorcycle driving robot with throttle, clutch and gear actuators
  • dynoKRAFT HTS high torque throttle servo

Scope of delivery

  • dynoKRAFT A200-2WD dynamometer
  • two vehicle loading ramps
  • PC-Trolley
  • weather station with cable
  • SP5 Controller with cable
  • capacitive and inductive RPM pickup,
  • software CD (unlimited licence)
  • installation manual (.pdf file)
  • software manual (.pdf file)
  • 5 years warranty
  • free support during warranty period

Please use the quotation tool to configure your dynoKRAFT dynamometer or schedule product presentation at dynoKRAFT office.
Our team will get back to your as soon as possible.

Should you have any technical questions or problems using the below form feel free to contact us. Our staff will assist you immediately.